Every colour meeting on a Newtown terrace starts the same way. "I just want it to look right." The owner has a phone full of charcoal-and-white facades. Then we take a blade to the window sill and show them what was on it in 1885: Indian red trim, a stone-coloured wall, a deep green front door. Choosing period-correct paint colours starts there, with what your house actually wore.
Heritage paint colours look right on old houses for a plain reason. The house was designed around them. Paint an 1880s terrace in a modern palette and it looks like it's wearing someone else's clothes, however good the brushwork is.
And charcoal dates. It's a 2015 look and it'll date faster than the house did.
Start with a paint scrape
Your house has its colour history written on it. Pick a sheltered spot: under a window sill, the back of a verandah bracket, a door frame behind a hinge. With a sharp blade, cut a shallow crater through the layers at a low angle. Each coat shows as a ring, like a tree. The bottom one or two are the originals.
Old colours fade and yellow under aged oil, so treat the ring as a guide. It still tells you whether the trim was dark or light, whether the walls were stone or cream, and whether the joinery was one colour or picked out in two. Use a blade, never sandpaper. Those bottom layers are lead.
Victorian heritage colours (roughly 1840 to 1900)
Victorian Sydney wanted its houses to look like stone. Render was coloured or painted in stone tones and ruled with lines to imitate sandstone blocks. Trim went darker and richer.
- Walls: sandstone, buff, fawn, stone grey, light ochre
- Joinery and trim: deep brown, Indian red, Brunswick green, olive
- Lace and ironwork: bronze green, chocolate or near-black, sometimes with the detail picked out
- Front doors: deep red, dark green, or grained to look like cedar or oak
Boom-era terraces from the 1880s got busy, with three or four colours on the one facade. Earlier Victorian cottages were plainer: a stone wall and one trim colour, done.
Federation colours (roughly 1890 to 1915)
Federation flips the formula. The walls are red face brick, which should stay unpainted, so the colour goes into the timber.
- Walls: face brick, or roughcast render in cream or stone
- Bargeboards, fretwork, brackets and verandah timber: cream or a warm off-white
- Window frames, sashes and edging: Indian red, deep green or brown
- Front doors: stained timber, or a strong red or green
- Roofs: terracotta Marseille tiles or slate, which every other colour has to sit with
The classic Federation look is cream timber detail against red brick, with a deep red or green trim holding the edges. Watch the white. Brilliant modern white didn't exist in 1905 and it glares against red brick. A warm cream reads right.
Inter-war bungalows from the 1920s run browns, creams, deep greens and a lot of stained timber. Same principle. Find the era, then the palette.
Think in three parts
A facade works on three colours: body, trim and accent. Body is the biggest area and the softest tone. Trim frames the windows, doors and edges, and it's stronger. The accent goes on sparingly: the front door, the lace, a band on the parapet cornice.
Four colours is the limit on all but the most elaborate boom-era terrace. Five and the facade looks like a lolly shop.
Councils and heritage conservation areas
Large parts of the inner west, Paddington, Woollahra, Glebe, Balmain and Hunters Hill sit inside heritage conservation areas. Repainting an already-painted surface in a sympathetic colour doesn't need approval in most of them. Painting a surface that's never been painted, like face brick or sandstone, needs council consent almost everywhere, and it's close to impossible to undo.
Rules vary between councils, and a house that's individually heritage listed has tighter controls than one that's simply in a conservation area. Check your council's development control plan before you buy tester pots.
Test heritage paint colours before you commit
- Paint test patches at least the size of an A3 sheet. A swatch the size of a stamp lies
- Look at them at 8 am and again at 4 pm. Sydney's afternoon sun warms everything up a shade
- Hold them against what's not changing: the roof, the brick, the sandstone sills, the neighbour's wall
- Walk across the street and look from there, because that's how everyone else sees it
On a terrace row, look hard at the neighbours. You're one bay in a row of six, and from the street the row reads as one building. Being different is fine. Clashing with the house you share a party wall with isn't.
The paint behind the colour
Colour is the last decision in the paint system, and the system limits the colour. An old lime-rendered wall needs a breathable product, and mineral paints come in a narrower, earthier range. Handy, because earthy is exactly what a Victorian wall wants.
On timber, the trim colour goes over a primer and an undercoat. For deep reds and greens we tint the undercoat toward the finish colour, so the topcoats aren't fighting a grey base. Dark colours on a west wall run hotter and fade faster, so read our post on paint that holds up in Sydney weather before you go deep on the sunny side.
We go through colours with you on site as part of our heritage painting and facade restoration work, paint scrape included if you want one. Book a free on-site quote and bring the Pinterest board. We'll talk you out of the charcoal.