Run your hand along the west wall of your house. If it comes away with chalky white dust on it, the paint's binder is breaking down. That's the first sign. How often you paint your house exterior in Sydney comes down to how fast that happens, and Sydney makes it happen faster on some walls than others.
The range is 5 to 10 years. Rendered masonry in a sheltered spot goes longer. Timber on a west-facing or coastal wall needs attention in 4 or 5. Exposure sets the number, and the calendar only roughly tracks it.
The better question is how the paint is holding up right now. A house that gets washed down and touched up stretches the interval. A house left until it's peeling needs far more prep, and that costs more than repainting a year earlier would have.
What Sydney weather does to exterior paint
Three things do most of the damage here.
- UV: our sun breaks down the binder and fades colour. North and west walls cop the most and fail first, every time
- Salt air: near the coast or the harbour, salt settles on everything, works into gaps and attacks nails, screws and brackets under the paint
- Humidity and summer storms: driving rain finds every unsealed joint, and warm damp air grows mould on shaded walls
Add the daily temperature swing. Timber and render expand and contract under a paint film that's lost its flex. That's why paint cracks at joints and around fixings long before the flat areas give up.
How long each surface lasts
These ranges assume the last job was prepared properly. If it wasn't, knock a few years off.
- Rendered masonry: 8 to 10 years or more if the render is sound and the wall isn't damp
- Weatherboard and timber cladding: 6 to 8 years, less on exposed walls
- Timber windows, doors, sills and fascias: 4 to 6 years. Shortest life of anything on the house, because they take direct weather and move the most
- Cast iron, railings and metalwork: depends almost entirely on whether rust was treated properly last time
- Verandah floors and decking: short, because they take foot traffic and standing water as well as sun
The trim always fails before the walls. On plenty of homes the smart plan is windows, sills and fascias on a shorter cycle and the walls on a longer one. That keeps water out of the timber, which is what actually matters.
Does the coast make that much difference?
Yes. A house three streets from the water in Mosman or Balmain needs attention sooner than the same house ten kilometres inland. Salt gets into joints and corrodes the metal underneath. A hose-down every few months, especially on the side facing the water, adds real life to an exterior finish and costs nothing.
Signs it's time to repaint, whatever the calendar says
Walk around the outside once a year, after winter, and look for these.
- Chalking: a fine powder comes off on your hand
- One wall noticeably more faded than the others
- Hairline cracking or a crazed pattern across the film
- Flaking, peeling or blistering, especially near the ground or under windows
- Gaps opening at joints, around window frames and where trim meets cladding
- Bare timber on sills, thresholds and the bottoms of doors
- Mould or black staining on shaded southern walls
- Rust bleeding through from nail heads or fixings
Bare timber and bare metal are the ones to act on fast. Once the surface is open, water gets in, and you've gone from a painting job to a repair job. We cover the wider warning signs in our post on the signs a home needs remedial work.
Old homes run on a different clock
Period homes across the inner suburbs have solid walls built to take in a little moisture and dry back out. Coat one of those in a sealing modern paint and it fails early however well it was applied, because the wall can't breathe. Repainting on schedule won't fix that. The system has to change. There's more in our post on why old homes need to breathe.
Which wall fails first, and why that matters
North and west go first on almost every Sydney house. They take the most sun through the hottest part of the day, and the paint there is working harder than anywhere else on the building. South walls get far less UV but stay damp longer, so they fail through mould and staining.
So you don't always have to do the whole exterior at once. If the west wall and the trim are tired and the rest is holding, do that wall and the trim now and the rest in a few years. A full repaint is tidier and the colour matches better. Staging it is still a legitimate way to spread the cost. Just be honest with yourself about whether the other walls are sound or only less obviously bad.
How to stretch the time between repaints
- Wash the exterior down once or twice a year, more near the coast
- Cut back plants touching or shading the walls and keeping them damp
- Keep gutters and downpipes clear so water isn't running down the face
- Touch up chips and bare spots on sills and thresholds as they show up
- Reseal gaps around windows and doors before they open right up
- Fix small timber problems now, not at repaint time
None of it is hard. It's the difference between a straightforward repaint and a full strip.
Repainting early costs less
Repaint while the old coating is mostly sound and the prep is a wash, a sand and spot-priming. Wait until it's failed and the old paint has to come off, and whatever the weather got into underneath has to be repaired. That second job is a lot more work. Waiting never saves money.
Not sure if your house can go another couple of years? We'll come and look and tell you straight. Our strip-back and preparation work is where a lasting exterior paint job is won. Book a free on-site quote and we'll walk the outside with you.