Tap the render on the front of an old Sydney terrace with a coin. If it sounds hollow, it's drummy, and it's coming off. Remedial repairs are the work we do before any paint goes near a wall like that: render, plaster, damp, salt and timber, fixed at the cause.
Get a Free On-Site QuoteMost painters will patch it, prime it and paint it. It looks great for a year. Then the patch cracks around its edges, the salt pushes through, and you're paying twice. We don't patch over a problem we can see.
I've been on the tools since 1998 and on old houses for most of the last 15 years. The same faults turn up in the same places. Damp at the base of the hall wall. Cracked render under the front window sill. Rot in the bottom rail of every double-hung window that faces west. Plaster blowing off behind the bathroom.
Find the cause, fix the cause, then repair the surface with materials that suit the age of the house. Lime render on soft Victorian brick. Lime or gypsum plaster matched to what's there. Timber spliced in with the same profile. Then it gets primed and handed to the same team for painting. Sometimes that's the next morning.
Repairs on their own are fine too. Plenty of jobs are just a damp hallway in Leichhardt or a run of rotten sills in Mosman. If the house needs more, we'll tell you, and we'll tell you what can wait.
Each of these is a symptom. The cause sits behind it, and that's what we chase. Some of them are cheap to fix now and very expensive in five years.
Signs we look for on a remedial repairs inspection:
Most Sydney houses built before 1920 have soft brick laid in lime mortar. The wall is meant to breathe. Patch it with hard cement render and the moisture can't get out through the patch, so it goes around it and up, carrying salt with it. That's why a cement patch on an old wall cracks around the edges within two years.
So we use lime renders and lime mortars on old masonry, and let them cure properly between coats. On timber we cut out the rot back to sound wood, splice in a matching profile, and prime every end grain. On plaster we re-fix what's sagging and rebuild missing cornice to the existing profile.
With rising damp, the fix starts outside: garden beds and concrete paths built up over the damp-proof course, blocked subfloor vents, a downpipe dumping water against the wall. Sort those, let the wall dry, then render. In that order.
Moisture readings, a tap test on the render, a look at drainage, vents and gutters. We work out what's actually driving the crack or the damp.
Ground levels dropped, vents cleared, downpipes redirected, failed pointing raked out. The repair only holds if the cause is gone.
Drummy render, salt-laden plaster and rotten timber cut back to sound material.
Lime render and mortar on old masonry, matched plaster, spliced timber. Each coat cured before the next.
Repaired surfaces primed with the right product for the material, ready for painting by the same team.
| Problem | What it looks like | How we fix it |
|---|---|---|
| Drummy render | Hollow sound when tapped, cracks, bulges | Cut out the failed section, re-render with a breathable lime mix to match |
| Rising damp | Tide mark and flaking paint low on the wall | Fix drainage and ventilation, remove salty render, let it dry, re-render in lime |
| Salt attack | White fur, crumbling brick faces, paint blisters | Remove salt-laden render, poultice where needed, sacrificial lime render |
| Rotten timber | Soft, split sills, rails and frames | Cut back to sound timber, splice or epoxy, prime all end grain |
| Failed pointing | Sandy or missing mortar joints | Rake out 15 to 20mm and repoint in lime mortar |
| Cracked or sagging plaster | Ceilings drooping, cracks at cornices | Re-fix or replace the section, skim, re-run cornice to profile |
Yes. We fix the cause first: soil and paths built up over the damp-proof course, blocked vents, downpipes discharging against the wall. Then the salty render comes off, the wall dries for 2 to 6 weeks depending on the season, and it's re-rendered in lime. Painting over it without that just moves the damp higher.
Cement is harder and less porous than old soft brick and lime mortar. Moisture can't get out through it, so it goes around and up, and the patch cracks at its edges within a year or two. Lime moves with the wall and lets it breathe.
No. A lot of our remedial work is one wall, one room or a set of window sills. We'll tell you what's urgent and what can wait, and you decide.
Tap it with a coin or the handle of a screwdriver. Solid render gives a sharp knock. Drummy render sounds hollow and dull, and you'll see fine cracks running across it. If more than a few hand-widths sound hollow, get it looked at before you paint.
Timber and plaster repairs are ready to prime in 1 to 3 days. Lime render needs more time to cure, around a day per millimetre of thickness before painting with a breathable paint, so a 20mm patch wants 3 weeks. We plan the painting around it.
We take on remedial repairs for homes right across Sydney, from the terraces of Paddington to the period homes of Hunters Hill. A few of the areas we cover:
Book a free on-site visit. One room or the whole house, we look at it in person and send you a written, itemised quote. Nothing to sign.
Book Your Free Quote