Six signs your heritage home needs remedial work

Weathered, rotting timber on a heritage home before remedial work

Most remedial work starts with an owner saying "It's only cosmetic." Sometimes it is. Plenty of times there's a cracked sill letting water into the wall below, or render that let go of the brick years ago. Your heritage home tells you when it needs remedial work. Here's what to look for on a ten-minute walk around your own place.

1. Cracked or drummy render

Tap the render with the handle of a screwdriver. Sound render gives a dull, solid knock. Drummy render sounds hollow, like a cardboard box, because it's come away from the wall behind it.

Hairline cracks under about 1mm in lime render are normal movement. Worry about cracks wider than that, cracks that step diagonally out from the corner of a window, and any crack with a hollow patch around it. A drummy section left alone falls off in one piece. On a parapet two storeys above the footpath, that's a safety problem.

The fix: cut back to sound edges, find out why it let go (damp, rusting steel, cement render on a lime wall), and patch in a mix that matches the original.

2. Damp, staining or salt low on the walls

A tide mark, paint bubbling just above the skirting, white fluffy salt, plaster that crumbles under your thumb. That's ground moisture and salt working through the wall. It won't stop by itself. The full story is in our post on rising damp in old homes.

Damp high up is a different sign. Water coming from above means a box gutter, parapet capping or flashing where a roof meets a wall. Get on a ladder or get someone who will.

3. Paint flaking, blistering or peeling

Where and how the paint is failing tells you why.

  • Blisters with water in them, low on a masonry wall: moisture pushing through from behind
  • Peeling in sheets with older paint showing underneath: the old coats have lost their grip, and new paint won't hold on them either
  • Flaking only on the north and west sides: UV has broken down the film. An overdue repaint
  • Cracking along timber joints: the timber's moving and water's getting in at the joint
  • Paint that comes away with white powder on the back: salt

If what's underneath is the problem, the paint has to come back to a sound surface before anything new goes on. That's strip-back and preparation work, and it's where a lasting paint job is won or lost.

4. Soft, split or rotting timber

Press a key into the bottom of the window sills, the door thresholds, the base of the verandah posts and the fascia boards under the gutters. Sound timber resists. Rotten timber gives, and feels spongy or stringy.

Check the double-hung sash windows properly. Look at the bottom rail of the lower sash, where water sits, and the sill under it. Look at the sash cords. A broken cord means a window that drops, or won't stay up without a book under it. A window painted shut for twenty years has its sashes glued to the beads and its weights hanging useless inside the box.

None of that means new windows. Sashes from the 1880s were made from old-growth timber that's denser than anything you can buy now. Rotten sections get cut out and new timber spliced in, the cords get replaced, the sashes get freed and eased, and the window works again. Rot left alone spreads into the sound timber and, at a sill, into the wall underneath.

5. Damaged cornices, mouldings and parapets

Outside, look up. Parapet cornices, string courses, window hoods and the moulded detail across a terrace facade are all there to shed water. When a section cracks or drops off, water gets into the top of the wall, where it does the most damage, and the next piece goes faster.

Inside, look along the ceiling cornices. Cracks running along the cornice line, a sag in the ceiling, or brown staining point to a roof leak or a failed fixing. Ornate plaster cornices can be repaired, and missing runs recreated from a mould taken off a sound section of the original.

6. Loose, soft or missing pointing

Run a key along a mortar joint. Old lime mortar is softer than modern mortar, and it should be. But if it comes out as loose sand, or the joints are sunk 10mm or more behind the brick face, water's getting into the wall.

Repoint in lime, matched to the original in colour and strength. Repoint in cement and you get the problem we cover in why old homes need to breathe: the mortar outlasts the brick, and the brick faces erode around it.

A ten-minute check for your heritage home

  • Walk the outside after rain and look where water sits, drips or runs down the wall
  • Tap the render at shoulder height and again down near the ground
  • Press every sill, threshold and verandah post base
  • Open every window. Note the ones that won't
  • Look up at the parapet and gutters from across the street
  • Inside, check the bottom 1.5 metres of every external wall

Why remedial work comes before paint

Every one of these is cheaper this year than next. A drummy patch the size of a dinner plate is an afternoon. The same patch three winters on is a section of facade and a scaffold.

And every one of them pushes through new paint within a season or two if you paint over it. You pay for the paint job twice, and the repair is bigger the second time.

If you've found two or three of these, get someone to look properly. Our remedial repairs and waterproofing are done by the same team that paints afterwards, so nobody hands the problem on to someone else. Book a free on-site quote and we'll tap, press and poke our way around the house with you.

Want a straight answer on your house?

Book a free on-site visit. One room or the whole house, we look at it in person and send you a written, itemised quote. Nothing to sign.

Book Your Free Quote