A planned Victorian suburb on a ridge
Annandale was subdivided from the old Johnston family estate from the late 1870s, and it was planned. A grid of wide streets runs off Johnston Street, the main road along the ridge, and the side streets fall away toward Whites Creek on one side and Johnstons Creek on the other.
The best-known houses are the turreted villas on Johnston Street people call the Witches' Houses, and the Hunter Baillie church spire is the landmark you steer by. The bulk of Annandale is two-storey terraces with iron lace balconies, freestanding Victorian villas, and Federation and inter-war houses on the later lots.
House painting in Annandale: the render detail fails first
Annandale houses carry a lot of render: parapets with urns and finials, moulded window hoods, decorative panels, and rusticated ground floors on the bigger villas. That's where paint fails first, because every crack in a moulding lets water into the wall and every ledge holds it.
We cut out failed render, rebuild mouldings to match, treat corroded cast-iron lacework and paint so the front reads clearly again. Our facade restoration page goes into the detail.
Slopes, three-storey backs and the western sun
Streets fall hard toward the creeks. A house that's single-storey at the front can be two or three at the back, so the rear wall is the tallest, hardest-to-reach and least-maintained wall on the property. On the Whites Creek side it also takes the full afternoon sun, and dark colours on that wall fade and chalk in half the time.
That's why we price every Annandale house on site. Scaffold on a three-storey rear wall over a sloping garden is a different job from a flat front, and a quote off photos can't see it. If you want a feel for the numbers first, read what house painting costs in Sydney.
Clay, cracks and seasons
The inner west sits on shale that weathers to reactive clay. It swells in a wet winter and shrinks in a dry summer, and old houses on shallow footings move with it. You see diagonal cracks running off the corners of doors and windows that open and close with the seasons.
Inside, we rake those out and fill with a flexible compound so they don't telegraph straight back through. Outside, we cut and patch the render. If a crack looks structural, wider than a few millimetres or stepping through the brick, that's an engineer's call, and we'll say so before we quote the paint.
Inner West Council and colour
Most of Annandale is a heritage conservation area under the Inner West Council. Original front detail should be kept, and painting brick or stone that's never been painted needs consent. A period heritage colour scheme is the easiest path, and on a rendered villa it looks better than anything modern anyway.
Balconies and lace on the terraces
The two-storey terraces on the side streets almost all have an upstairs balcony with iron lace, and the balcony is where the house leaks. Water sits on the balcony floor, gets under the door sill and into the front room ceiling below. The lace rusts where it sits in the floor or the rail.
We check the balcony floor and the door sill, seal what needs sealing with our waterproofing and sealing work, and strip and repaint the lace with a rust-inhibiting primer under two coats. Broken panels go to a foundry for repair or recasting.
Over the creek, Leichhardt has a looser mix of eras, and Glebe has the same terraces on flatter, damper ground.
What we do in Annandale
Most Annandale jobs are interior and exterior house painting. Where the house needs it, remedial repairs, strip-back and preparation and waterproofing and sealing come first. On period homes we also take on facade restoration and heritage home restoration, run in stages by the same crew.
Getting a quote in Annandale
We cover Annandale and the streets around Johnston Street, Booth Street, Whites Creek and the Hunter Baillie church. We come to the house, walk it with you and send a written, itemised quote. The visit is free and there’s nothing to sign. Call 0416 799 787 or use the quote form.